Ldpe Polymer

Product Details:

DOW LDPE 310E is a fractional melt index low density polyethylene resin. DOW LDPE 310E has been specially designed for superior processability on blown film lines leading to significant output improvements. The resin offers additionally excellent draw down. It can be used pure or in blends with LLDPE resins.'


Please Note:
Price is subject to market changes. 

Product Details:

LTM 2447/47 is especially suitable for stiffer thin films for textile packagin

Please note:
Price is subject to market changes.

Product Details:

Lupolen 1800 H is a low density polyethylene resin used in a wide range of processing methods such as injection molding, blow molding and film extrusion. It exhibits very good softness and toughness and good dimensional stability. Lupolen 1800 H is delivered in pellet form and is not additivated. Typical customer applications include caps & closures, lids, foams and champagne corks.


Please Note:
Price is subject to market changes. 

Product Details:

Lupolen 2421 H is Low Density Polyethylene additivated with antioxidant package.It is delivered in pellet form.

Please Note:
Price is subject to market changes.

Product Details:

Lupolen 2421 H is an additivated, low density polyethylene. It contains an antioxidant and is delivered in pellet form. Foodlaw compliance information about this product can be found in separate product documentation. This product is not intended for use in medical and pharmaceutical applications

Please Note:
Price is subject to market changes.

Product Details:

Lupolen 2427 K is an additivated, low density polyethylene. It contains an antioxidant, slip and anti-blocking agent. It is delivered in pellet form. Foodlaw compliance information about this product can be found in separate product documentation. This product is not intended for use in medical and pharmaceutical applications.


Please Note:
Price is subject to market changes. 

Product Details:

DOW LDPE 352E low density polythylene rasin is a high clarity rasin designed for a clarity over wrap applications.This rasin does contain erucamide slip and antiblock additives.

Please Note:
Price is subject to market changes.

Product Details:

Petrothene NA860 is a series of medium flow, low density polyethylene resins for the injection molding of caps, closures and other specialty applications. These resins exhibit balanced toughness, softness, dimensional stability and processability.

The base resin NA860 meets the requirements of the Food and Drug Administration, 21 CFR 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food..." Specific limitations or conditions of use may apply. Contact your Equistar product safety representative for more information.

Specific recommendations for processing NA860 can only be made when the processing conditions, equipment and end use are known.

Please Note:
Price is subject to market changes.

Product Details:

LF512 is an Low-density polyethylene resin produced in the tubular process, Designed for film, foamed and has excellent processability, excellent optical properties, and mechanical properties

Key Features:
• Excellent processability and mechanical properties • Low Fish Eye • Excellent optical properties • Slip, Anti-blocking properties • Heat seal

Applications :
• General Blown film, Injection 



Please Note:
Price is subject to market changes.

Product Details:

AGILITY 1500 Performance LDPE is a high pressure LDPE resin designed specifically for high processability and good optics neat and in blends with LLOPE resins for blown or cast films
Complies with:
⚫US FDA 21 CFR 177.1520(c)2:2
EU, No 10/2011
Canadian HPFB No Objection
Consult the regulations for complete details.



Please Note:
Price is subject to market changes.

Product Details:

Lotrène® FD0270 is an additive free grade mainly recommended for the extrusion of thin film for light and medium duty applications. 

The suitable molecular structure of Lotrène® FD0270 makes it possible to produce very thin, clear and glossy films, Lotrène® FD0270 gives films of especially good dimensional stability with easy sealing whatever the type of machine used. 




Please Note:
Price is subject to market changes.

Product Details:

® Lotrène FE8000 is an additive free grade, produced by high pressure tubular process, mainely recommended for light and medium duty film applications with good optical properties and medium rigidity.



Please Note:
Price is subject to market changes.

Product Details:

DOW LDPE 5051 Resin is a barefoot grade for general purpose blown im applications
Main Characteristics:Blown film extrusionPellet form
Complies withUS. FDA, 21 CFR 177 1520(c)2.1Europe EU No 10/2011Consult the regulations for complete details




Please Note:
Price is subject to market changes.

Product Details:

I56A200U has excellent processability with low degree of warpage and good mechanical properties. It is characterized by fast cycling and is especially suitable for household items like Buckets, Mug, Toys etc.


Please Note:
Price is subject to market changes. 

Product Details:

J1020FA20 is a film grade and can be processed easily on conventional blown film lines. The grade is manufactured without any slip additive to facilitate adhesion during lamination.


Please Note:
Price is subject to market changes.

Product Details:

F18A010U has excellent processability with optimum balance of mechanical and optical properties. It is without slip and antiblocking agent additive.
It is widely used for lamination and cling film applications.  



Please Note:
Price is subject to market changes.

Product Details:

1020FA20 is a film grade Low Density Polyethylene (LDPE) produced by high pressure autoclave process. It can be extruded with considerable ease on any conventional LDPE extruder. The polymer is manufactured without any slip additive to facilitate adhesion during lamination.



Please Note:
Price is subject to market changes.

Product Details:

Applications:
• Flexible package(tie layer or sealant layer of laminating film), Paper and paper board

Description:
• LUTENE® LB7000 is mainly intended for extrusion coating and can be processed at high speed with uniform thickness and width.
• LUTENE® LB7000 has a good adhesion strength with Al-foil, polymer film, paper, paper board and other substrate and excellent neck-in characteristics.
• LUTENE® LB7000 contains no additives.
• LUTENE® LB7000 complies with U.S. FDA 21CFR 177.1520 C and EU Directive 2002/72 /EC and its amendments and hence Article 3 of European Regulation No. 1935/2004.


Please Note:
Price is subject to market changes.

Product Details:

HANWHA Polyethylene 955 is a Low Density Polyethylene extrusion coating grade offering :
EXCELLENT DRAWABILITY

VERY LOW NECK-IN

EXCELLENT HEAT SEALABILITY.


Please Note:
Price is subject to market changes.

Product Details:

LDPE 1022 FN 24 is a low density polyethylene made by a high pressure process without antioxidant.LDPE 1022 FN 24 is suited to many applications in the field of consumer, industrial,food or hygiene packaging such as bags, lamination and coextrusion film.Information provided by Total Petrochemicals.


Please Note:
Price is subject to market changes.

Product Details:

SABIC® LLDPE 122WJ is a linear low density polyethylene resin designed for blown film applications. Films made from these resins exhibit excellent transparency, good impact and toughness properties. LLDPE 122WJ contains high levels of both slip agent and Anti-Block.


TYPICAL APPLICATIONS:
General purpose film, lamination film, stretch blown film.

Please Note:
Price is subject to market changes.

Product Details:

LFI 2130 is a high molecular weight, low density polyethylene for producing heavy-duty packaging films for application like shrink hoods. LFI 2130 contains no slip agent and antiblock additives. This grade offers outstanding strength and toughness, very good draw down ability and biaxial shrink properties. LFI 2130 has been manufactured under SABTEC licensed technology.




Please Note:
Price is subject to market changes. 

Product Details:

Relene 24FA040 is a Low Density Polyethylene (LDPE) grade produced by high pressure tubular process. It does not contain Slip and Antiblock and can be extruded on any conventional LDPE extruder with ease.


Please Note:
Price is subject to market changes.

Product Details:

J22FA002E is a Low-Density Polyethylene (LDPE) film grade. Film produced from this grade exhibits very good mechanical & impact resistance and this grade is suitable for heavy duty applications.



Please Note:
Price is subject to market changes.  

Product Details:

J1020XA20 is a natural Low Density Polyethylene resin for Medium voltage cable insulation using direct peroxide addition. It is designed for easy processing on conventional cable extrusion lines. It does not contain any additive and is unstabilized. Required amount of antioxidant must be added to achieve desired ageing performance.



Please Note:
Price is subject to market changes. 

Product Details:

Aramco LDPE E1970 is a low density polyethylene resin which has good bonding strength with various substrates, low neck-in properties and excellent process ability for thinner coating. Aramco LDPE E1970 is not formulated with any additive.



Please Note:
Price is subject to market changes.

Product Details:

Sipchem LD 0322 GO is a Low Density Polyethylene resin, manufactured by IPC an affiliate of Sipchem in The Kingdom of Saudi Arabia using an Exxon-Mobil high-pressure tubular process. LD 0322 GO is designed to offer high strength combined with medium optical properties.

Applications:
Agricultural Film, Blend Partner, Construction Film, Foam, Heavy Duty Bags, High Performance Collation Shrink, Pallet Shrink Film, Profile Extrusion.


Please Note:
Price is subject to market changes.

Product Details:

LFI2130is a high molecular weight low density polyethylene film grade combining good flexible extrusion behavior and superior mechanical properties.



Please Note:
Price is subject to market changes.

Product Details:

DESCRIPTION:
Lotrène FE8004 is produced by a high pressure tubular process and is mainly recommended for light and medium duty film applications with good optical properties. It contains slip agent (target: 300 ppm erucamide).


Please Note:
Price is subject to market changes.

Product Details:

The LD 165 series are LDPE grades,offerring high strength combined with medium optical properties.


Please Note:
Price is subject to market changes.