AVH Polychem Private Limited

F46003 is a High Density Polyethylene grade suitable for general purpose blown film & extrusion blow moulding applications. Articles blown fromthis grade exhibit moderate to good stiffness. The resin offers good melt strength, ESCR and impact resistance.

Note : 
Price Subjected to Market Condition. 

HDPE FI0851P is a high molecular weight high density polyethylene resin designed for blown film applications. This resin has broad molecular weight distribution that makes it easier to process. Films made from this resin exhibit high stiffness, excellent impact and toughness characteristics. 

Please Note:
Price is subject to market changes.

This high molecular weight, hexene copolymer is tailored for blown film applications that require:  Toughness and durability  Good processability  Good blending characteristics with HDPE HMW resins.

Please Note:
Price is subject to market changes. 

H D3840UA is high density polyethylene copolymer containing butene-1(C4) as comonomer. It is suitable for use as rotational moulding applications.

Please Note:
Price is subject to market changes:

s Processing Techniques Typical Properties Alathon L4930TC is a bimodal high density polyethylene copolymer natural resin used by customers for telecommunications conduits. L4930TC offers an excellent balance of stiffness, toughness and ease of processing. Conduits made with this resin are used with fiber optic cable, electrical cable and telecommunications cable. L4930TC meets the material requirements for polyethylene conduit as per ASTM F2160 and also meets the requirements of ASTM D3350 cell classification 435540A

Please Note:
Price is subject to market changes.

Hyperzone HY55430 is a high density polyethylene resin that exhibits excellent processability and environmental stress crack resistance. Typical applications include bottles for household chemicals, food products, and personal care products.

Please Note:
Price is subject to market changes.

Histif 5431 Z is a high density polyethylene with an excellent combination of stiffness and ESCR and a high impact resistance. It is delivered in pellet form and contains antioxidants. Typical customer applications include Lring drums for the packaging of dangerous goods. Histif 5431 Z is not intended for use in medical and pharmaceutical applications.

Please note:
Price is subject to market changes.

Alathon L5005 is a high molecular weight high density copolymer that provides broad bimodal molecular weight distribution, high stiffness and good heat seal response and strength. L5005 is selected by customers for use in merchandise bags, grocery sacks, trash can liners, produce bags and roll stock.


Please Note:
Price is subject to market changes.

Luban DMDZ-6147 is high-density polyethylene with broad molecular weight distribution and high molecular weight. This product provides an excellent combination of extrudability and parison stability, which contribute to uniform wall thickness in large parts. The grade is ideal for blow molding containers such as the 5 - 55 gallon (20 - 210 lit) closed head shipping containers and other similar parts. The broad distribution also provides outstanding environmental stress crack resistance (ESCR) at a good rigidity. The smooth surface of molded parts is readily treated and printed for high quality applications.
Main Characteristics:
• Hexene High Density Resin • Outstanding environmental stress crack resistance • Excellent parison melt strength/ low sag • Good extrudab.


Please Note:
Price is subject to market changes.

EX5 is a high density polyethylene with 1-Butene as comonomer. It is good stiffness and tenacity, high molar mass.


Please note:
Price is subject to market changes.

PRODUCT DESCRIPTION:
P4808 is a natural bimodal high density polyethylene (HDPE) resin, specifically designed for n application. It provides good stress crack resistance properties (ESCR).


Please Note:
Price is subject to market changes.

E5201S is a broad molecular weight distribution HDPE, produced by the Mitsui CX Process E5201S is recommended for General Purpose Blow Molding Applications. It can also be used for Double Walled Corrugated Pipes & General Purpose Pipe Applications E5201S combines exceptional processability and excellent mechanical properties.



Please Note:
Price is subject to market changes.

This type of HDPE  is a copolymerof ethylene and - butene with Narrow Unimodal MWD.



Please Note:
Price is subject to market changes.

Hostalen ACP 5331 H is a state of the art HDPE resin, produced by latest Hostalen ACP technology. Hostalen ACP 5331 H is easy processable on injection moulding and compression moulding equipment. Exceptional organoleptic properties and a good balance of stiffness, toughness and environmental stress cracking resistance make Hostalen ACP 5331 H the choice of customers for the production of closures for sparkling water, CSD and many other types of food and nonfood caps and closures as well as tube shoulders.


Please Note:
Price is subject to market changes.

This type of HDPE is a copolymer of ethylene and 1 - butene with narrow unimodal MWD.


Please Note:
Price is subject to market changes.

L60075 is a High Density Polyethylene (HDPE) grade suitable for injection moulding applications where good mechanical properties are essential with gloss, dimensional stability, good ESCR, required for technical mouldings like moulded crates, luggage shells, helmets, defence applications, etc. L 60075 bas recommended service life of 5 years. L 60075 is suitable for applications where articles are exposed to sunlight e.g. soft drink crates, defence applications, helmets, paint pails, etc.



Please Note:
Price is subject to market changes.

DOW HOPE 08454N Resin is a narrow molecular weight distribution copolymer designed to offer excellent impact strength and toughness with good stiffness. This resin has good processability over a wide range of molding conditions.

  For structural foams, industrial containers, cases/crates
  Excellent impact strength, toughness and good stiffness
Comples with:
Canadian HPFB No Objection (With Limitations)
EU. No 10/2011
US FDA 21 CFR 177.1520 (c) 3.2a
US FDA-DMF
U.S. USP
Consult the regulations for complete details.



Please Note:
Price is subject to market changes.

M5018L is an Injection Molding HDPE produced by Spherilene Technology M5018L is recommended for general purpose Injection Molding M5018L combines excellent processability with good mechanical properties.



Please Note:
Price is subject to market changes. 

M60075 is a High Density Polyethylene (HDPE) grade suitable for injection moulding applications where good mechanical properties are essential with gloss, dimensional stability, good ESCR,  required for technical mouldings like moulded crates, luggage shells, helmets,defence applications, etc.



Please Note:
Price is subject to market changes.

S2G8002 a High Molecular Weghe High Density Polyethylene (HMHDPE) blow molding grade with balanced seiffness and impact strength. It possesses broad molecular weight distribution, very good sweil and excellent processability 5268002 can readily be processed on mest of HDPE low moulking machines with accumulators.




Please Note:
Price is subject to market changes.

Description:
MARPOL® HDF 504 is a bi-modal HMW-HDPE resin designed for high dart impact strength and good processing characteristics. MARPOL® HDF 504 is well balanced in overall physical properties and provides good stiffness for thin gauge film applications.



Please Note:
Price is subject to market changes.

I50A180 is recommended for manufacturing household products like bucket, mug etc. It provides excellent processability with low degree of warpage and superior gloss. The material conforms to natural resin designation IS 7328-3B-MB-FXDE of IS 7328:2020.


Please Note:
Price is subject to market changes.

AVH Polychem Ltd is one of the leading Plastic Raw Material Suppliers in India. With over a decade of experience in trading superior quality plastic granules like LDPE granules and PP granules, we are one of the foremost plastic granules importers in India.

B5500 is a HMHDPE Blow Molding Grade produced by Mitsui CX Process B5500 combines exceptional processability with high rigidity, excellent mechanical properties and impact resistance B5500 is recommended for medium bulk containers (~ 120 liter) for Chemicals, Detergent, Lube oils B5500 is also suitable for the manufacture of blow molded water tanks up to 1000 liters. Adequate UV Stabilizer needs to be added externally for usage in outdoor water tank applications BIS Designation Code: IS 7328-3B-BB-FXTA.



Please Note:
Price is subject to market changes.

LDPE Foam
This product has been designed with an optimum balance of melt strength and drawability to give excellent performance in cast film, foam, blown film and bubble film extrusion. When properly fabricated, the product displays: excellent processability low neck-down (cast film) very good toughness and impact properties and good tear strength. In foam extrusion, This product gives an ideal balance between cell growth and stabilization to allow the production of very low density products without voids. Main Characteristics: - Cast film - Foam - Bubble film - General purpose blown film. Slip Additive: None Antiblock Additive: None

AVH Polychem Ltd is one of the leading Plastic Raw Material Suppliers in India. With over a decade of experience in trading superior quality plastic granules like LDPE granules and PP granules, we are one of the foremost plastic granules importers in India.

We proudly serve the raw materials needs of different commercial and industrial manufacturers across the world. Through rigorous processes and extensive quality checks, we ensure that our products meet the standards and specifications of our clients before they receive it.   

Note :-

We deal in local and Imported grade of all major brands.  

 

The price of the product is subject to market changes.

Product Description :
Hostalen CRP 100 black is a high density polyethylene (HDPE), black coloured similar RAL 9004 with high melt viscosity for extrusion, injection and compression moulding. The product is classified as PE 100 and provides excellent stress crack resistance properties (ESCR) combined with very good long term hydrostatic strength.


Please Note :
Price is subject to market condition  

Please Note:
Price is subject to market changes.

AVH Polychem Ltd is one of the leading Plastic Raw Material Suppliers in India. With over a decade of experience in trading superior quality plastic granules like LDPE granules and PP granules, we are one of the foremost plastic granules importers in India.

We proudly serve the raw materials needs of different commercial and industrial manufacturers across the world. Through rigorous processes and extensive quality checks, we ensure that our products meet the standards and specifications of our clients before they receive it.

Note :-

We deal in local and Imported grade of all major brands.  

 

The price of the product is subject to market changes.

B6401 is a HDPE Blow Molding Grade produced by the Mitsui CX Process. This resin is particularly recommended for upto 20-liter containers for Lubricants and Edible oils. B6401 combines exceptional processability with high rigidity, excellent mechanical properties and impact resistance. 


Please Note:
Price is subject to market changes.