AVH Polychem Private Limited

Moplen HP461Y is a new generation polypropylene homopolymer, supplied in pellet form. Its main application is in melt blown non-wovens, with very narrow molecular weight distrbution, typical end use products including diapers, sanitary napkins, oil absorbent mats, wipes, masks, air filtration media, and wet tissues.


Please Note:
Price is subject to market changes.

Moplen EP548S is a nucleated heterophasic copolymer with antistatic agent used for injection moulding applications. It exhibits an outstanding balance of mechanical properties combined with a medium high fluidity. Moplen EP548S is extensively used in housewares and in thin-walled containers for food packaging (e.g. margerine tubs, yoghurt pots, etc.).


Please Note: 
Price is subject to market changes.

P6006AD is black compound high density polyethylene (classified as PE112) specially designed for pressure pipe applications. It delivers exceptional processing performance.

Please Note:
Price is subject to market changes. 

PP Copolymer 3400MN is a heterophasic natural colored high flow, medium impact resistance and nucleated grade produced by the latest Spheripol II Technology with following features: • Excellent processability. • Good balance of Impact & Stiffness properties

Please Note:
Price is subject to market changes.

Luban HP1106K is manufactured using the Spheripol Technology. Luban HP1106K polypropylene is a medium flow homopolymer grade recommended for the production of films that can be converted into stretched tapes for weaving applications.

Please Note:
Price is subject to market changes.

SABIC PP 506P is intended for producing low denier stretched tapes with the following features: Consistent processability; Good process ability at high line speeds and low deniers; Low tapes shrinkage; Low water carry over; Very good mechanical properties.


Please Note:
Price is subject to market changes. 

Luban polypropylene is manufactured using Novolen vertical stirred Gas-phase polymerization process. Luban HP5101RC is a homopolymer polypropylene with anti-gas fading stabilization, it is suitable for the production of spunbond fibers.


Please Note:
Price is subject to market changes. 

Development grade Moplen HP3435 is a Polypropylene Homopolymer. It does not contain any slip and antiblocking additives. Potential applications include cast PP film applications for packaging, lamination and metallized film for food ( pasta, snacks, bakery products and confectionery) or overwrap film and stationery films etc. This is a provisional data sheet for Moplen HP3435.


Please Note:
Price is subject to market Changes.

012E50 is a High Density Polyethylene manufactured using Nova Chemical's Sclairtech Solution Polymerisation Technology with following features: • Excellent processability • Superior mechanical  properties • Lower water carryover

Recommended Applications: HDPE 012E50 is recommended for following applications • Tarpaulin • woven sacks • Monofilaments for mosquito nets , fishing nets & filter cloth etc ies • Lower water carryover


Please note:
Price is subject to market changes.

Moplen EP300H is a polypropylene impact copolymer resin with good cold impact resistance and good dimensional stability. Typical customer applications are corrugated board extrusion, stational sheets, blow molded bottles, injection molded crates, pails and lids.


Regulatory Status
For regulatory compliance information, see Moplen EP300H Product Stewardship Bulletin (PSB) and Safety.

Please Note:
Price is subject to market changes.

SAHARA C 160HM is a nucleated heterophasic copolymer, suitable for injection molding applications, and contains an antistatic agent. It exhibits a high stiffness combined with a medium fluidity. Sahara C 160HM is extensively used in housewares, furniture, cylindrical containers and crate. This grade is not intended for medical and pharmaceutical applications.  

Product Characteristics:
Commercial:Active. Processing Method: InjectionMolding. Typical applications: Crates, Housewares, Opaque containers and Pails. 

Please Note:
Price is subject to market changes.

TYPICAL APPLICATIONS ¬ Thin-walled injection molding applications ¬ Toys, furniture, sport goods, leisure goods, Housewares, TWIM food containers
KEY CHARACTERISTICS ¬
Nucleated heterophasic copolymer ¬ Contains anti-static agent ¬ Excellent balance of good stiffness-impact with medium fluidity ¬ Food contact approval for specific applications (refer to NATPET).


Please Note:
Price is subject to market changes.

MANGPOL HM065AT is a Polypropylene homo-polymer produced by latest solvent free gas phase polymerization using Novolen Technology. It is ideal material recommended for applications like TWIM, compounding, molding items with intricate part designs and long flow paths, multi-cavity molding, master-batches etc. HM065AT features excellent flow characteristics coupled with superior dimensional stability, stiffness, and reduced cycle time during processing. This grade is not to be used for manufacturing of any direct / indirect food contact substance / applications.

Recommended Applications:
• HM065AT is recommended for Injecting Molding items of long flow path, TWIM, Compounding, Master-batches etc


Please Note:
Price is subject to market changes.

• SÉETEC H7700 is designed for the extrusion of fine fibers with the spun bond technology. This grade is characterized by very narrow molecular weight distribution(MWD), with antigas fading stabilization.



Please Note:
Price is subject to market changes. 

This polypropylene homopolymer is tailored for applications that require:
• Good resistance to gas fading

Typical raffia, fiber/yarn applications include:
• Woven industrial fabrics and bags
• Rope and cordage
• Woven carpet backing
• Woven geotextile fabrics

This resin meets these specifications:
• FDA 21 CFR 177.1520(c)1.1. May be used in contact with all types of foods per Table 1 of 21 CFR 176.170 (c) at conditions of use A through H per Table 2 of 21 CFR 176.170(c).
• All constituents of this resin are listed in Commission Regulation (EU) No 10/2011. Meets the requirements of Commission Regulation (EU) No 10/2011, Regulation (EC) No. 1935/2004, and Commission Regulation (EC) .
No 2023/2006.



Please Note:
Price is subject to market changes.

Luban HP2100N is manufactured using Novolen vertical stirred Gas-phase polymerization process. Luban HP2100N is a homopolymer polypropylene injection molding grade. The grade exhibits good flow and stiffness.

Application :
General injection molding, closures, furniture, houseware. 



Please Note:
Price is subject to market changes.

Repol H200MK is recommended for use in Injection Molding processes. It is an ideal material to use in molding syringes and clear rigid articles with intricate, long flow paths and multicavity molding. Repol H200MK contains clarifier and antistatic agent that reduces static charge build up on products. 


Please Note:
Price is subject to market changes. 

Luban HP3107K is manufactured using the Spheripol Technology. Luban HP3107K is a homopolymer polypropylene designed for the production of biaxially oriented polypropylene films (BOPP). The product is suitable for metallizable film, both as monolayer and in coextruded structures.



Please note:
Price is subject to market changes.

EL-Pro P440J is an impact copolymer polypropylene resin suitable for injection molding process. This resin is recommended for product that requires high impact strength with good processibility. 



Please Note:
Price is subject to market changes.

Luban polypropylene is manufactured using Novolen vertical stirred Gas-phase polymerization process. Luban HP1151K is Homopolymer polypropylene for high transparency thermoforming applications with enhanced optical appearance. The grade is nucleated & also contains antistatic agent. The product provides enhanced process ability with excellent isotropic shrinkage control.


Please Note:
Price is subject to market changes.

SABIC® PP 5705PR is a homopolymer polypropylene resin and is typically used for injection molding applications. Molded parts made from this resin typically exhibits high stiffness, good heat resistance and good flow characteristic.



Please Note:
Price is subject to market changes. 

CHARACTERISTICS:
COSMOPLENE FS5612 is Polypropylene Terpolymer product designed for BOPP film with standard heat sealing, good optical properties and excellent processibility in terms of roll stickiness.


Please Note:
Price is subject to market changes.

H 034EM is a polypropylene homopolymer used for extrusion and thermoforming applications. This product is formulated with a low water-carry-over additive package.



Please Note:
Price is subject to market changes.  

• SÉETEC M1500 is a polypropylene block copolymer for injection molding applications. It exhibits a good balance of stiffness and impact strength. This grade meets the FDA requirement in the code of Federal Regulations in 21 CFR 177.1520 for food contact.



Please Note:
Price is subject to market changes.

Luban EP2340L is manufactured using the Spheripol Technology. Luban EP2340L is a medium flow impact copolymer polypropylene with improved mechanical properties balance. The product features high stiffness and outstanding impact strength at low temperatures and is specifically designed for injection molding applications. The grade exhibits high stiffness and outstanding impact strength, 35% higher than conventional grades. Luban EP2340L is suitable for a wide range of applications in the packaging, automotive and consumer goods industries.  



Please Note:
Price is subject to market changes.

Moplen EP546U is a nucleated heterophasic copolymer with antistatic additivation, suitable for injection mouldin applications. It exhibits an outstanding balance of mechanical properties combined with a very hig fluidity. Moplen EP546U is extensively used in housewares and think wall injection moulded containers for food packaging ( eg. margarine tubs, yoghurt pots etc).



Please Note:
Price is subject to market changes.

Pellet type melt blown grade Very high melt flow & very narrow MWD Complies with FDA Regulations 21 CFR 177.1520 for food contact .

Application:
Diapers, Sanitary napkins, oil absorbent mats, wipes, wet tissues, masks, air filtration media and medicals

Please Note:
Price is subject to market changes.

S42005is a natural polyethylene grade recommended as a base resinfor sheathing/ jacketing injellyfilledtelecommunications cables. It isdesigned to provide excellent processing characteristicsand formulated to offer superior physical / electrical insulation properties including goodenvironmental stress crack resistance. 


Please Note:
Price is subject to market changes.

Luban polypropylene is manufactured using Novolen vertical stirred Gas-phase polymerization process. Luban HP3104K is a homopolymer polypropylene, it is suitable for high speed metallisable Biaxially Oriented Polypropylene (BOPP) film.



Please Note:
Price is subject to market changes.

SABIC PP 522K is formulated with an advanced nucleating agent and is specially developed for in-line and off-line thermoforming applications. SABIC PP 522K encompasses the following features: High stiffness; Very good clarity and aesthetics; Very good dimensional stability; Easy processability and faster cycling.



Please Note:
Price is subject to market changes.

AVH Polychem Ltd is one of the leading Plastic Raw Material Suppliers in India. With over a decade of experience in trading superior quality plastic granules like LDPE granules and PP granules, we are one of the foremost plastic granules importers in India.

We proudly serve the raw materials needs of different commercial and industrial manufacturers across the world. Through rigorous processes and extensive quality checks, we ensure that our products meet the standards and specifications of our clients before they receive it.

AVH Polychem Ltd is one of the leading Plastic Raw Material Suppliers in India. With over a decade of experience in trading superior quality plastic granules like LDPE granules and PP granules, we are one of the foremost plastic granules importers in India.

We proudly serve the raw materials needs of different commercial and industrial manufacturers across the world. Through rigorous processes and extensive quality checks, we ensure that our products meet the standards and specifications of our clients before they receive it.

Polypropylene homopolymer. The base resin meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520(a)(1)(i) and (c)1.1a. The adjuvant meet their respective FDA regulations and 21 CFR 177.1520(b). In summary, this resin meets the FDS criteria covering safe use of polyolefin articles and component of articles intended for food contact use. TSCA Registry: CAS# 9003-07-0.


Please Note:
Price is subject to market changes.

Product Description:
HP Durapol M50200 is a Butene based High Density Polyethylene grade recommended for HD Injection Moulded products.
The grade offers excellent dimensional stability coupled with better aesthetics
Standout Characteristics: Low cycle time, low warpage and superior processability.
Recommended Applications: Household articles, Thin walled injection moulded products and food containers

Please Note : 
Price subject to market condition